# Cleanng up smaller plasma cut holes
**URL:** https://fireball.discourse.group/t/cleanng-up-smaller-plasma-cut-holes/2793
**Category:** Welding & Fabrication
**Created:** [August 2, 2024, 4:45pm UTC](https://fireball.discourse.group/t/cleanng-up-smaller-plasma-cut-holes/2793 "2024-08-02T16:45:49Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@tcat](https://fireball.discourse.group/u/tcat)
#### Post date: [August 2, 2024, 4:45pm UTC](https://fireball.discourse.group/t/cleanng-up-smaller-plasma-cut-holes/2793/1 "2024-08-02T16:45:49Z")
Is there a better tool than a twist drill to square up the kerf on 1/2" holes cut on a CNC table?
---
### Author:  [@HenrysWorkshop](https://fireball.discourse.group/u/HenrysWorkshop)
#### Post date: [August 2, 2024, 6:27pm UTC](https://fireball.discourse.group/t/cleanng-up-smaller-plasma-cut-holes/2793/2 "2024-08-02T18:27:09Z")
Chucking Reamer, call MSC and they’ll get you one. Go HSS
---
### Author:  [@tcat](https://fireball.discourse.group/u/tcat)
#### Post date: [August 2, 2024, 7:35pm UTC](https://fireball.discourse.group/t/cleanng-up-smaller-plasma-cut-holes/2793/3 "2024-08-02T19:35:38Z")
Thanks, I figured that there had to be something better.