# Custom Vise for Welding Schools

**URL:** <https://fireball.discourse.group/t/custom-vise-for-welding-schools/4021>\
**Category:** General\
**Created:** [October 29, 2025, 4:30am UTC](https://fireball.discourse.group/t/custom-vise-for-welding-schools/4021 "2025-10-29T04:30:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![kbum3739](https://yyz2.discourse-cdn.com/flex036/user_avatar/fireball.discourse.group/kbum3739/32/4848_2.png) [@kbum3739](https://fireball.discourse.group/u/kbum3739)\
**Post date:** [October 29, 2025, 4:30am UTC](https://fireball.discourse.group/t/custom-vise-for-welding-schools/4021/1 "2025-10-29T04:30:03Z")

</div>

I want to create about 20 custom vises for my pipe welding class that I instruct at. It serves 2 functions, it allows the students to align pipe coupons to tack them together (without clamping) and has some kind of table clamp at the end to hold 2 3/8" - 6 5/8" diameter pipe anywhere from 4” long to 36” long to cut or grind the ends for welding. I created a rough drawing but I don’t know how to attatch it. Any suggestions for what clamp to use or how to mount it would be greatly appreciated, if I can figure out how to attatch a picture

---

<div class="post-metadata">

**Author:** ![Fireball\_Jason](https://yyz2.discourse-cdn.com/flex036/user_avatar/fireball.discourse.group/fireball_jason/32/52_2.png) [@Fireball\_Jason](https://fireball.discourse.group/u/Fireball_Jason)\
**Post date:** [November 11, 2025, 4:12pm UTC](https://fireball.discourse.group/t/custom-vise-for-welding-schools/4021/2 "2025-11-11T16:12:37Z")

</div>

You can upload a picture by selecting the icon in the header in the text box that has a arrow pointing up. You can upload the photo from your phone or computer. This icon might be in the lower right corner of the screen on your phone.

 ![IMG_5123](https://canada1.discourse-cdn.com/flex036/uploads/fireball/original/2X/e/ef0cd9f94911138e54b26bb82b756c24ced79e60.jpeg)