# DWx2 Final setup (for now)

**URL:** <https://fireball.discourse.group/t/dwx2-final-setup-for-now/4437>\
**Category:** Fixture Tables\
**Tags:** dragon-wagon\
**Created:** [August 31, 2026, 4:58pm UTC](https://fireball.discourse.group/t/dwx2-final-setup-for-now/4437 "2026-08-31T16:58:35Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![dcferris](https://avatars.discourse-cdn.com/v4/letter/d/5daacb/32.png) [@dcferris](https://fireball.discourse.group/u/dcferris)\
**Post date:** [August 31, 2026, 4:58pm UTC](https://fireball.discourse.group/t/dwx2-final-setup-for-now/4437/1 "2026-08-31T16:58:35Z")

</div>

Over the weekend I finally got my 36x24 Dragon Wagons setup.

It took a little bit of work. I was very pleased at how well I got the 2 tables. I blocked in the front and the back. Clamped some tooth block extensions across the top. I used 5x 3/4 shoulder bolts to hold it togeatger. I was able to get both tables almost perfect. I can slide a 1-2-3 block all across the top and the sides and it doesn’t catch at all. I would say it’s better then half a thou.

 ![43013](https://canada1.discourse-cdn.com/flex036/uploads/fireball/original/2X/4/4adf58f58fae6509230df9f7cc3068bc16003621.jpeg)

The side kick vise took a bit of work. It was sitting very low from the table top. With the v-washer there is no adjust. I took out the 5/8 shoulder bolt and v-washer out and replaced it with the 3/4 shoulder bolt and used this sketchy setup to get it flush before tightening it down.

 ![43011](https://canada1.discourse-cdn.com/flex036/uploads/fireball/original/2X/b/b8a2cc5a46138fb3707a32d4fb97b159df0f141f.jpeg)

For now I placed my 28 and 20 extension blocks around the outside. Same story blocked them all in and got them flush.

I spent some time figuring out a tool box for under the table. I didn’t want to waste any space. My go to is usually pack-out’s. But they aren’t that roomy for the space they occupy. Looked at several tool boxes. In the end the Harbor Fraight Series 3 27" top. Fit just about perfect. Leaves no wasted space on the small dragon wagon.

 ![43034](https://canada1.discourse-cdn.com/flex036/uploads/fireball/original/2X/b/b3d1a0fc858ed4f5ab16e0161091e1efc0c72040.jpeg)

 ![43035](https://canada1.discourse-cdn.com/flex036/uploads/fireball/original/2X/8/8ef05bc241d51cd8927377be0b9cc43225b76b8d.jpeg)

Small modifications I needed to lose the washers on the foot tray, I removed the lock bars from the box since the top can’t open now, and the handles needed to come off. I also messed with the slag trays. I’ve got it so all but one off the small ones I can remove. It got trapped by the vise. The two in the middle you can remove from the bottom.

 ![43027](https://canada1.discourse-cdn.com/flex036/uploads/fireball/original/2X/7/74427f5e89d5dbc2325c43f1e544a99d79ff97ce.jpeg)

 ![43030](https://canada1.discourse-cdn.com/flex036/uploads/fireball/original/2X/b/b7d4550bd0460fc88d0e367b2e1f14021ae26832.jpeg)

 ![43029](https://canada1.discourse-cdn.com/flex036/uploads/fireball/original/2X/9/90ec9740a12a5350c9ac476300ca479451c4b890.jpeg)

People with more then one Dragon Wagon how did you lay them out?