# Fixture table 5/8" holes size
**URL:** https://fireball.discourse.group/t/fixture-table-5-8-holes-size/2705
**Category:** Fixture Tables
**Created:** [June 25, 2024, 3:30pm UTC](https://fireball.discourse.group/t/fixture-table-5-8-holes-size/2705 "2024-06-25T15:30:15Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@Scratch](https://fireball.discourse.group/u/Scratch)
#### Post date: [June 25, 2024, 3:30pm UTC](https://fireball.discourse.group/t/fixture-table-5-8-holes-size/2705/1 "2024-06-25T15:30:15Z")
I found a friend that has a laser table and he is going to cut some 5/8" holes in a 1/2" sheet for me. I’ve decided to go with 5/8" hole size on a 2" grid. His Trumpf 2600W laser table has an accuracy of +/- .005. Do I have him cut the holes at .625? .630?
What size should I have him cut them at?
---
### Author:  [@Scratch](https://fireball.discourse.group/u/Scratch)
#### Post date: [June 27, 2024, 1:18pm UTC](https://fireball.discourse.group/t/fixture-table-5-8-holes-size/2705/9 "2024-06-27T13:18:35Z")
So are you saying that the pins in your 5/8” fixtures and clamps are a hair less than .625” then?
---
### Author:  [@Fireball\_Jason](https://fireball.discourse.group/u/Fireball_Jason)
#### Post date: [June 27, 2024, 1:35pm UTC](https://fireball.discourse.group/t/fixture-table-5-8-holes-size/2705/10 "2024-06-27T13:35:38Z")
Yes the tooling is unsized to fit. Hole spacing is also important. +/- .002 hole separation is the target.