# Suggestions for a tool or brush

**URL:** <https://fireball.discourse.group/t/suggestions-for-a-tool-or-brush/4492>\
**Category:** General\
**Created:** [October 17, 2026, 8:57pm UTC](https://fireball.discourse.group/t/suggestions-for-a-tool-or-brush/4492 "2026-10-17T20:57:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![claudei](https://avatars.discourse-cdn.com/v4/letter/c/f475e1/32.png) [@claudei](https://fireball.discourse.group/u/claudei)\
**Post date:** [October 17, 2026, 8:57pm UTC](https://fireball.discourse.group/t/suggestions-for-a-tool-or-brush/4492/1 "2026-10-17T20:57:00Z")

</div>

I would like some suggestions for a tool or brush that I could attach to a drill to clean the ¾" holes in my welding table.  
Thanks

---

<div class="post-metadata">

**Author:** ![Larry\_Brazil](https://yyz2.discourse-cdn.com/flex036/user_avatar/fireball.discourse.group/larry_brazil/32/4644_2.png) [@Larry\_Brazil](https://fireball.discourse.group/u/Larry_Brazil)\
**Post date:** [October 18, 2026, 12:40am UTC](https://fireball.discourse.group/t/suggestions-for-a-tool-or-brush/4492/2 "2026-10-18T00:40:43Z")

</div>

I just purchased a 10-brush set of stainless steel brushes which have a end to fit in a drill. “3/4” diameter is one of the sizes included. Cost me $10.

---

<div class="post-metadata">

**Author:** ![claudei](https://avatars.discourse-cdn.com/v4/letter/c/f475e1/32.png) [@claudei](https://fireball.discourse.group/u/claudei)\
**Post date:** [October 18, 2026, 1:12pm UTC](https://fireball.discourse.group/t/suggestions-for-a-tool-or-brush/4492/3 "2026-10-18T13:12:43Z")

</div>

Thank you for your response. Is it sold on Amazon or elsewhere?