# Table Leveling fasteners

**URL:** <https://fireball.discourse.group/t/table-leveling-fasteners/2952>\
**Category:** Fixture Tables\
**Created:** [November 19, 2024, 9:52am UTC](https://fireball.discourse.group/t/table-leveling-fasteners/2952 "2024-11-19T09:52:58Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gringo.Ironworks](https://yyz2.discourse-cdn.com/flex036/user_avatar/fireball.discourse.group/gringo.ironworks/32/1827_2.png) [@Gringo.Ironworks](https://fireball.discourse.group/u/Gringo.Ironworks)\
**Post date:** [November 19, 2024, 9:52am UTC](https://fireball.discourse.group/t/table-leveling-fasteners/2952/1 "2024-11-19T09:52:58Z")

</div>

> **[Plate Leveling Fastener (1 Stud)](https://fireballtool.com/products/plate-leveling-fastener-1-stud)**
>
> Plate Leveling Fasteners These fasteners were designed for the DIY welding tables. If you want a flat welding table you need these fasteners! These fastener allows the builder to be able to make a surface flat. Fasteners are fully machined,...

so I just found this on the web site? Not sure how I missed them to date. but they appear to be the answer on leveling my 5/8 x 8 x 4 top. Jason do you have any pics of these in use or installing them? How many would you recommend for that six of a table? seems like the bolt would need to be a beveled low profile type? by the time I counter sync for that Alan head in the Pic seems like I might run out of table thickness ? I know your " things not to do" post says no to use a bowed plate, but I noticed after the fact i have a slight bow i’ll need to pull straight.

---

<div class="post-metadata">

**Author:** ![Fireball\_Jason](https://yyz2.discourse-cdn.com/flex036/user_avatar/fireball.discourse.group/fireball_jason/32/52_2.png) [@Fireball\_Jason](https://fireball.discourse.group/u/Fireball_Jason)\
**Post date:** [November 19, 2024, 1:49pm UTC](https://fireball.discourse.group/t/table-leveling-fasteners/2952/2 "2024-11-19T13:49:42Z")

</div>

These were designed years ago for a fixture table that had separated individual plates. The plate prototype was 1/2 thick and used a bugle head bolt instead of the socket head in the photo.

Here’s a super long video of the table.

[![](https://canada1.discourse-cdn.com/flex036/uploads/fireball/original/2X/d/daddddacd62b5b049333a185bca7d21790919672.jpeg "How to Build a Flat Welding Table. The lost footage found Retro Video") ](https://www.youtube.com/watch?v=EDeIq3SZNRs)

---

<div class="post-metadata">

**Author:** ![Gringo.Ironworks](https://yyz2.discourse-cdn.com/flex036/user_avatar/fireball.discourse.group/gringo.ironworks/32/1827_2.png) [@Gringo.Ironworks](https://fireball.discourse.group/u/Gringo.Ironworks)\
**Post date:** [December 5, 2024, 12:44pm UTC](https://fireball.discourse.group/t/table-leveling-fasteners/2952/3 "2024-12-05T12:44:56Z")

</div>

I see two different options for leveling fasteners, the singles ,& the sets, wich do you recommend nd What spacing do you recommend plan to buy them while the sale is going

---

<div class="post-metadata">

**Author:** ![Fireball\_Jason](https://yyz2.discourse-cdn.com/flex036/user_avatar/fireball.discourse.group/fireball_jason/32/52_2.png) [@Fireball\_Jason](https://fireball.discourse.group/u/Fireball_Jason)\
**Post date:** [December 5, 2024, 2:58pm UTC](https://fireball.discourse.group/t/table-leveling-fasteners/2952/4 "2024-12-05T14:58:37Z")

</div>

With more fasteners it’s going to be easier to achieve your flatness goals. My hunch says. 1 every 12-16 inches.

---

<div class="post-metadata">

**Author:** ![Gringo.Ironworks](https://yyz2.discourse-cdn.com/flex036/user_avatar/fireball.discourse.group/gringo.ironworks/32/1827_2.png) [@Gringo.Ironworks](https://fireball.discourse.group/u/Gringo.Ironworks)\
**Post date:** [December 6, 2024, 1:14am UTC](https://fireball.discourse.group/t/table-leveling-fasteners/2952/5 "2024-12-06T01:14:39Z")

</div>

That wss pretty dang slick with the wire!