# \#welding-table-top

**URL:** https://fireball.discourse.group/tag/welding-table-top/33.md

[Latest](https://fireball.discourse.group/latest.md) · [Categories](https://fireball.discourse.group/categories.md) · [Tags](https://fireball.discourse.group/tags.md)

---

## [Thick vs Thin fixture tables? What’s your thoughts on this?](https://fireball.discourse.group/t/thick-vs-thin-fixture-tables-what-s-your-thoughts-on-this/1606)

<div class="topic-metadata">

**Author:** [@Fireball\_Jason](https://fireball.discourse.group/u/Fireball_Jason)\
**Replies:** 5\
**Last updated:** [June 30, 2025, 3:13pm UTC](https://fireball.discourse.group/t/thick-vs-thin-fixture-tables-what-s-your-thoughts-on-this/1606 "2025-06-30T15:13:11Z")

</div>

I recently found this article and I thought it was an interesting topic. I thought it be great to have a discussion about it. This topic gets brought up a lot at trade shows. Let me start off with the excessive clamp…

---

## [DIY drill guide](https://fireball.discourse.group/t/diy-drill-guide/2567)

<div class="topic-metadata">

**Author:** [@NEwelder](https://fireball.discourse.group/u/NEwelder)\
**Replies:** 30\
**Last updated:** [May 16, 2024, 1:03pm UTC](https://fireball.discourse.group/t/diy-drill-guide/2567 "2024-05-16T13:03:49Z")

</div>

What should the final size be on the holes? Mine seem a little tight after getting started and thought about getting a reamer to get to a specific dimension