I’ve noticed the two different twist blocks you’ve added to the 3/4" lineup but am having trouble visualizing potential uses. I think it would be helpful to see some examples in use.
–Larry
Yes I’ll show some examples in a upcoming video. But basically it points the holes in a different direction when combined to another riser block.
These blocks represent the 3 current styles. Each one has a different purpose.
First thing you’ll notice is the holes are one a different offset then the table. Sometimes this is helpful to get “off the grid”. Here’s some overhead photos to illustrate.
The other thing you’ll notice is the bolt pattern for the riser. This is to change the desired direction it’s pointed. This is handy to move the riser location over the top of material like in this example.
These blocks can be configured many ways. It’s handy to have two of each style just in case. They are also great dog leg blocks when used directly to the tooth block.
2 Likes
Thanks @Fireball_Jason! I don’t see the first one you listed currently offered on the website, just the second & third.
May I suggest offering a “handy pack” of twist blocks containing 2ea of the 3 styles? Perhaps at a little post-Fabtech discount for those of us who didn’t get to attend? 
–Larry
1 Like